An API object that manages external access to the services in a cluster, typically HTTP.
Ingress can provide load balancing, SSL termination and name-based virtual hosting.
For clarity, this guide defines the following terms:
Ingress exposes HTTP and HTTPS routes from outside the cluster to services within the cluster. Traffic routing is controlled by rules defined on the Ingress resource.
internet | [ Ingress ] --|-----|-- [ Services ]
An Ingress can be configured to give Services externally-reachable URLs, load balance traffic, terminate SSL / TLS, and offer name based virtual hosting. An Ingress controller is responsible for fulfilling the Ingress, usually with a load balancer, though it may also configure your edge router or additional frontends to help handle the traffic.
An Ingress does not expose arbitrary ports or protocols. Exposing services other than HTTP and HTTPS to the internet typically uses a service of type Service.Type=NodePort or Service.Type=LoadBalancer.
You must have an ingress controller to satisfy an Ingress. Only creating an Ingress resource has no effect.
Ideally, all Ingress controllers should fit the reference specification. In reality, the various Ingress controllers operate slightly differently.
Note: Make sure you review your Ingress controller’s documentation to understand the caveats of choosing it.
A minimal Ingress resource example:
apiVersion: networking.k8s.io/v1beta1 kind: Ingress metadata: name: test-ingress annotations: nginx.ingress.kubernetes.io/rewrite-target: / spec: rules: - http: paths: - path: /testpath backend: serviceName: test servicePort: 80
As with all other Kubernetes resources, an Ingress needs
For general information about working with config files, see deploying applications, configuring containers, managing resources.
Ingress frequently uses annotations to configure some options depending on the Ingress controller, an example of which
is the rewrite-target annotation.
Different Ingress controller support different annotations. Review the documentation for
your choice of Ingress controller to learn which annotations are supported.
The Ingress spec has all the information needed to configure a load balancer or proxy server. Most importantly, it contains a list of rules matched against all incoming requests. Ingress resource only supports rules for directing HTTP traffic.
Each HTTP rule contains the following information:
/testpath), each of which has an associated backend defined with a
servicePort. Both the host and path must match the content of an incoming request before the load balancer directs traffic to the referenced Service.
A default backend is often configured in an Ingress controller to service any requests that do not match a path in the spec.
An Ingress with no rules sends all traffic to a single default backend. The default backend is typically a configuration option of the Ingress controller and is not specified in your Ingress resources.
If none of the hosts or paths match the HTTP request in the Ingress objects, the traffic is routed to your default backend.
There are existing Kubernetes concepts that allow you to expose a single Service (see alternatives). You can also do this with an Ingress by specifying a default backend with no rules.
If you create it using
kubectl apply -f you should be able to view the state
of the Ingress you just added:
kubectl get ingress test-ingress
NAME HOSTS ADDRESS PORTS AGE test-ingress * 126.96.36.199 80 59s
188.8.131.52 is the IP allocated by the Ingress controller to satisfy
Note: Ingress controllers and load balancers may take a minute or two to allocate an IP address. Until that time, you often see the address listed as
A fanout configuration routes traffic from a single IP address to more than one Service, based on the HTTP URI being requested. An Ingress allows you to keep the number of load balancers down to a minimum. For example, a setup like:
foo.bar.com -> 184.108.40.206 -> / foo service1:4200 / bar service2:8080
would require an Ingress such as:
apiVersion: networking.k8s.io/v1beta1 kind: Ingress metadata: name: simple-fanout-example annotations: nginx.ingress.kubernetes.io/rewrite-target: / spec: rules: - host: foo.bar.com http: paths: - path: /foo backend: serviceName: service1 servicePort: 4200 - path: /bar backend: serviceName: service2 servicePort: 8080
When you create the Ingress with
kubectl apply -f:
kubectl describe ingress simple-fanout-example
Name: simple-fanout-example Namespace: default Address: 220.127.116.11 Default backend: default-http-backend:80 (10.8.2.3:8080) Rules: Host Path Backends ---- ---- -------- foo.bar.com /foo service1:4200 (10.8.0.90:4200) /bar service2:8080 (10.8.0.91:8080) Annotations: nginx.ingress.kubernetes.io/rewrite-target: / Events: Type Reason Age From Message ---- ------ ---- ---- ------- Normal ADD 22s loadbalancer-controller default/test
The Ingress controller provisions an implementation-specific load balancer
that satisfies the Ingress, as long as the Services (
When it has done so, you can see the address of the load balancer at the
Name-based virtual hosts support routing HTTP traffic to multiple host names at the same IP address.
foo.bar.com --| |-> foo.bar.com service1:80 | 18.104.22.168 | bar.foo.com --| |-> bar.foo.com service2:80
The following Ingress tells the backing load balancer to route requests based on the Host header.
apiVersion: networking.k8s.io/v1beta1 kind: Ingress metadata: name: name-virtual-host-ingress spec: rules: - host: foo.bar.com http: paths: - backend: serviceName: service1 servicePort: 80 - host: bar.foo.com http: paths: - backend: serviceName: service2 servicePort: 80
If you create an Ingress resource without any hosts defined in the rules, then any web traffic to the IP address of your Ingress controller can be matched without a name based virtual host being required.
For example, the following Ingress resource will route traffic
service2, and any traffic
to the IP address without a hostname defined in request (that is, without a request header being
apiVersion: networking.k8s.io/v1beta1 kind: Ingress metadata: name: name-virtual-host-ingress spec: rules: - host: first.bar.com http: paths: - backend: serviceName: service1 servicePort: 80 - host: second.foo.com http: paths: - backend: serviceName: service2 servicePort: 80 - http: paths: - backend: serviceName: service3 servicePort: 80
You can secure an Ingress by specifying a SecretStores sensitive information, such as passwords, OAuth tokens, and ssh keys.
that contains a TLS private key and certificate. Currently the Ingress only
supports a single TLS port, 443, and assumes TLS termination. If the TLS
configuration section in an Ingress specifies different hosts, they are
multiplexed on the same port according to the hostname specified through the
SNI TLS extension (provided the Ingress controller supports SNI). The TLS secret
must contain keys named
tls.key that contain the certificate
and private key to use for TLS. For example:
apiVersion: v1 kind: Secret metadata: name: testsecret-tls namespace: default data: tls.crt: base64 encoded cert tls.key: base64 encoded key type: kubernetes.io/tls
Referencing this secret in an Ingress tells the Ingress controller to
secure the channel from the client to the load balancer using TLS. You need to make
sure the TLS secret you created came from a certificate that contains a CN
apiVersion: networking.k8s.io/v1beta1 kind: Ingress metadata: name: tls-example-ingress spec: tls: - hosts: - sslexample.foo.com secretName: testsecret-tls rules: - host: sslexample.foo.com http: paths: - path: / backend: serviceName: service1 servicePort: 80
An Ingress controller is bootstrapped with some load balancing policy settings that it applies to all Ingress, such as the load balancing algorithm, backend weight scheme, and others. More advanced load balancing concepts (e.g. persistent sessions, dynamic weights) are not yet exposed through the Ingress. You can instead get these features through the load balancer used for a Service.
It’s also worth noting that even though health checks are not exposed directly through the Ingress, there exist parallel concepts in Kubernetes such as readiness probes that allow you to achieve the same end result. Please review the controller specific documentation to see how they handle health checks ( nginx, GCE).
To update an existing Ingress to add a new Host, you can update it by editing the resource:
kubectl describe ingress test
Name: test Namespace: default Address: 22.214.171.124 Default backend: default-http-backend:80 (10.8.2.3:8080) Rules: Host Path Backends ---- ---- -------- foo.bar.com /foo service1:80 (10.8.0.90:80) Annotations: nginx.ingress.kubernetes.io/rewrite-target: / Events: Type Reason Age From Message ---- ------ ---- ---- ------- Normal ADD 35s loadbalancer-controller default/test
kubectl edit ingress test
This pops up an editor with the existing configuration in YAML format. Modify it to include the new Host:
spec: rules: - host: foo.bar.com http: paths: - backend: serviceName: service1 servicePort: 80 path: /foo - host: bar.baz.com http: paths: - backend: serviceName: service2 servicePort: 80 path: /foo ..
After you save your changes, kubectl updates the resource in the API server, which tells the Ingress controller to reconfigure the load balancer.
kubectl describe ingress test
Name: test Namespace: default Address: 126.96.36.199 Default backend: default-http-backend:80 (10.8.2.3:8080) Rules: Host Path Backends ---- ---- -------- foo.bar.com /foo service1:80 (10.8.0.90:80) bar.baz.com /foo service2:80 (10.8.0.91:80) Annotations: nginx.ingress.kubernetes.io/rewrite-target: / Events: Type Reason Age From Message ---- ------ ---- ---- ------- Normal ADD 45s loadbalancer-controller default/test
You can achieve the same outcome by invoking
kubectl replace -f on a modified Ingress YAML file.
Techniques for spreading traffic across failure domains differs between cloud providers. Please check the documentation of the relevant Ingress controller for details. You can also refer to the federation documentation for details on deploying Ingress in a federated cluster.
You can expose a Service in multiple ways that don’t directly involve the Ingress resource:
Was this page helpful?
Thanks for the feedback. If you have a specific, answerable question about how to use Kubernetes, ask it on Stack Overflow. Open an issue in the GitHub repo if you want to report a problem or suggest an improvement.